A&F Introduction Video

Established in 2011, A&F(Shanghai) Testing Technology Co.,Ltd.is an independent third-party laboratory with headquarters in Shanghai, with offices in HongKong, Ningbo, Qingdao and Guangzhou.The types of testing products include children's products and toys, Food contact material, Textiles, Cosmetics,Hardgoods, Electronic and Electrical Product, Persona Protective Equipment, Water, Waste gas, Soil in the environment,and Microbial testing of various products.

Our Services

埃欧孚实验室仪器

A&F Lab Equipment

  • 电感耦合等离子体质谱仪(ICP-MS)
    ICP-MS is an elemental analysis instrument with very high sensitivity, which can measure trace elements with a content of ppb or below in the solution. Widely used in semiconductor, geological, environmental and biopharmaceutical industries.
  • 石墨炉原子吸收光谱仪(GTA)
    Graphite furnace atomic absorption spectroscopy is a method that uses graphite materials to make tubes, cups and other atomizers, and uses current heating to atomize for atomic absorption analysisSince all the samples participate in atomization and avoid the dilution of atomic concentration in the flame gas, the analytical sensitivity has been significantly improved. This method for determining trace metal elements is better than many other methods in performance,and can be used for the analysis of small quantities of samples and direct analysis of solid samples.Therefore its application domain is very extensive.
  • 火焰原子吸收光谱仪(AAS)
    Atomic absorption spectrometer is an instrument for qualitative and quantitative analysis of measured elements based on the absorption of characteristic spectral lines by ground state atomic vapor of the element to be measured.Widely used in petrochemical, environmental sanitation, metallurgical mines, materials, geology, food, medicine and other fields.
  • 气相色谱质谱仪(GC-MS)
    Gas chromatography-mass spectrometry (GC-MS) is a method that combines the characteristics of gas chromatography and mass spectrometry to identify different substances in samples.It is mainly used in industrial testing, food safety, environmental protection and other fields.Such as pesticide residues, food additives, etc.;Textiles such as banned azo dyes, chlorophenol detection. Cosmetics detection such as dioxane, flavor and fragrance detection;Electronic and electrical products detection, such as polybrominated biphenyl, polybrominated biphenyl ether detection;There may be a variety of complex compounds involved in physical evidence testing, and the combination of temperament and instrumentation provides strong support for the qualitative and quantitative analysis of these complex compounds in the forensic identification process.

埃欧孚实验室仪器

A&F Lab Equipment

  • 高效液相色谱仪(HPLC)
    HPLC is the application of high-performance liquid chromatography principles, mainly used for the analysis of high boiling point non-volatile, thermally unstable and large molecular weight organic compounds. HPLC is widely used in food analysis, cosmetics detection, environmental analysis and other fields because of its advantages of high resolution, high sensitivity, fast speed, repeatable use of chromatographic column and easy collection of effluent components.
  • 吹扫捕集(Atomx XYZ)
    Atomx XYZ integrates an automatic sampler and purge trap device,which can be used for VOC pretreatment in solids or liquids, and uniquely uses methanol to automatically extract VOCs in solid samples
  • 紫外可见分光光度计(UV-VIS)
    Ultraviolet-visible spectrophotometer is an analytical instrument based on the principle of ultraviolet-visible spectrophotometry, which utilizes the absorption of radiation in the uV-visible spectrum by matter molecules is analyzed.
  • 能量色散型荧光光谱仪(EDX)
    The X-ray tube emits X-rays to irradiate the sample, and the atoms contained in the sample emit X-rays unique to the atoms. This X-ray is called a fluorescent X-ray, and each element has a specific wavelength (energy). Therefore, qualitative analysis can be performed by detecting the wavelength of the X-ray.In addition, the intensity and concentration of fluorescence X-ray are functionally related, , and the quantitative analysis can be performed by detecting the X-ray amount of each element's X-ray characteristic wavelength.
玩具及儿童产品

Toys And Children's Products


Government regulations and industry standards are getting more and more strict, and consumers are paying highly attention to product quality and safety.A&F testing is committed to assisting enterprises domestic and overseass to reduce risks of quality and safety, takes an active approach to maintain corporate reputation, and provides custom-made services for toys and children's products, in order to meet various standards and requirements.
检测项目 Testing Items
  • Stuffed toy
  • Action figure
  • Riding toy
  • Games
  • Arts and crafts materials
  • Doll
  • Electrical and electronic toys
  • Collection
  • Figurines
  • Combination toys
  • Toy Accessories
  • Books
  • Balls
  • Seasonal toys
  • Play
  • Children's furniture
  • Musical toys
  • Other products for children under 14 years old
检测标准 Testing Standard
  • International:International toy safety standards (ISO 8124)
  • China:national standards of People's Republic of China (GB 6675)
  • EU:Toy safety standards(EN71), Safety standards for electric toys(EN62115)
  • USA:Consumer Product Safety Commission(CPSC), American Society for Testing and Materials(ASTM F963)
  • Canada:Canadian dangerous goods (toys) Regulations(CCPSA SOR/2011-17)
  • UK:British Standards Institution
  • German :German Standards Association(DIN EN71)
  • France:French Standards Association(NF EN71)
  • Australia: Australian Standards Association(AS/NZA ISO 8124)
食品接触材料

Food contact material


Food contact products contain packages or containers for food and beverage, tableware, cookware and kitchen utensils, also contain chemicals such as paints, adhesives, lubricating oil contact with food directly or indirectly.
检测对象 Testing Object
  • Raw materials and finished materials: plastic, rubber, metal, ceramics, enamel, paper and cardboard, paint, etc.
  • Food packaging containers: plastic, metal, paper, rubber, plastic bags, insulated cups, etc.
  • Kitchenware and cookware: Pot, bowl, gourd ladle, basin knives and forks, coffee machines and various kitchen appliances
  • Children's products: baby pacifier, bottle, knife and fork,drinking glasses, etc.
检测项目 Testing Items
  • Sensory test
  • The total amount of migration
  • Special migration (various simulants)
  • Potassium permanganate consumption
  • Residue on evaporation
  • Heavy metal
  • Burning residue
  • Volatile substances, formaldehyde, decolorization test, density
  • Microbiological index
检测标准 Testing Standard
China:
  • National Food Safety Standard General Safety Requirements for Food Contact Materials and Products GB 4806.2-2015
  • Food safety National standard pacifier
  • Food safety National standard enamelware
  • Food safety National standard Ceramic products
  • Food safety National standard Glass product
  • Food safety National standard Plastic resin for food contact
  • Food safety National standard Plastic materials and products for food contact
  • Food safety National standard Paper and cardboard materials and products for food contact
  • Food safety National standard Metallic materials and products for food contact
  • Food safety National standard Food contact coatings
  • Food safety National standard
  • Food safety National standard General hygienic regulations for the production of food contact materials and products
  • Food safety National standard Standards for the use of additives for food contact materials and products
  • Food safety National standard Disinfecting meal (cooking) equipment
The European Union and its member states:
  • Framework Directive for Food Contact Products
  • Requirements of 2010 regulations on food-contact plastic materials
  • EEC Directive Requirements for Food Contact Ceramic Materials
  • Nitrosamines and nitrosamine compounds
  • EU child use and care product standards
  • Germany Food, Consumer Goods and Feed Code (LFGB)
USA:

In the United States, food contact products are regulated by the US FDA and belong to the category of direct food additives. The specific requirements are implemented in accordance with the federal regulations CFR and FDA enforcement policy guidelines.

  • Indirect food additives
  • Lead content, cadmium content in ceramic tableware, lead content in silver plated tableware, etc.
  • California Tableware Safety Act
  • Other state requirements
In addition to the above standard testing, we can also provide customized product safety and functional testing services upon customer request.
化妆品

Cosmetics


Nowadays the use of cosmetics is universal, as prolonged closely skin contact chemicals, cosmetics's safety and quality have become theconcern of the world.All countries establish strict rules and regulations to strenthen safety requirements for cosmetic products.A&F has been committed to providing strong technical support for cosmetics enterprises.Through quality assurance services such as testing and risk assessment, A&F assists customers to improve product quality and increase product value, as well as help the products's pace to the distribution and retail channels.
检测项目 Testing Items
  • Microbiological inspection items
  • Sanitation chemical inspection items
  • Risk assessment project
  • Safety risk substance testing
检测标准 Testing Standard
China:
  • Cosmetic Safety Technical Specifications 2015 Edition
  • Cosmetics Hygiene Specification 2007 Edition
  • GB/T29680-2013 facial cleanser, facial cleanser
  • QB/T2872-2007 mask
  • QB/T1857-2013 Emollient cream
  • GB/T29665-2013 Skin care lotion
  • QB/T2654-2013 Handwashing fluid
  • GB/T299902013 Emollient oil
USA:
  • 21CFR 701/740US cosmetic labeling
  • 21CFR 73/74/82/700/701/740 US cosmetic ingredients
  • 21CFR 700. 13 Mercury in cosmetic
  • USP<51>Preservative effectiveness
  • USP<61>Microbial Enumeration tests
  • USP<62>Test for specified microorganisms
纺织品

Textile


Recognized by many famous suppliers worldwide,A&F textile lablotory provides services including label recommendation,physical and safety performance testing,chemical testing, etc.
Testing Items
Mandatory test:

Fiber content label、Washing care label、Down/Feather detection、Fire performance testing、Restricted substance testing

Quality and performance testing:

Dimensional stability、Color fastness、Physical properties

Accessories safety performance test:

Small object test
Button zipper performance test
Antibacterial and mildew testing

Testing Standard
  • National Standard of the People's Republic of China (GB)
  • People's Republic of China Textile Industry Standard (FZ)
  • The People's Republic of China Industry Standard (QB)
  • American Association of Textile Chemists and Dyestuffs (AATCC)
  • American Society for Testing and Materials (ASTM)
  • American National Standards Institute (NIST)
  • US Consumer Product Safety Commission (CPSC)
  • Canadian National Standards Association (CAN/CGSB)
  • European Standards Association (EN)
  • British Standards Institution (BS)
  • Japan Industrial Association (JIS)
  • Australian Standards Association (AS)
  • German Standards Association (DIN)
  • Other International Organization for Standardization (ISO)
轻工产品

Hardgoods


As a leading lab in hardgoods products testing, A&F delivers reliable and efficient testing service according to different standards such as GB,AS,NZS,ASTM,BS,DIN,EN,ISO,NF)for household products,stationery,sporting goods, etc. and escorts customer for high-quality and competitive products.
检测对象 Testing Object
Light industry products cover a wide range, including but not limited to the following products
  • Stationery
  • Furniture
  • Simulation jewelry
  • Handbags and accessories
  • Sports and fitness equipment
  • Hand tools and garden products
  • Glasses and sunglasses
  • Packing and shipping
  • Paper products
  • Candle
  • Kitchen utensils
  • Seasonal gifts
  • Decorations
检测项目 Testing Items
  • Aging and weather resistance
  • Durability
  • Flame retardant performanc
  • Materials Analysis
  • Performance testing
  • Strength and stability
  • Control of toxic and hazardous substances
  • Transportation and packaging inspection
检测标准 Testing Standard
  • General safety requirements for student supplies
  • Neutral ink pen and refill
  • CPAI-84:1995 Specification for Flame-Resistant Materials used in Camping Tentage
  • ASTM G154-12a Standard Practice for Operation Fluorescent Ultraviolet(UV) Lamp Apparatus for Exposure of Nonmetallic Materials
  • BS 7272-1 Writing and marking instruments-Part 1:Specification for caps to reduce the risk of Asphyxiation
  • BS 7272-2 Writing and marking instruments-Part 2:Specification for end closures to reduce the risk of asphyxiation
  • ISO 12312-1-2013 Eye and face protection-sunglasses and related eyewear-Part 1:Sunglasses for general use
  • EN 581 Outdoor furniture-Seating and tables for camping,domestic and contract use.
电子电器

Electronic And Electrical Product


Equipped with most advanced testing facilities and highly experienced personnel,A&F provides you with professional quality ensurance solutions for electronics products,and provide a”one-stop”approach to supporting our customers'quality assurance efforts in material identification,reliability testing, safety regulation and EMC testing,restricted substances such as REACH SVHC,ROHS,California Propostion 65 and so on.
检测对象 Testing Object
  • Lighting Products
  • Household appliances
  • Consumer Electronics
  • Electrical tools
  • Electric toys
  • Electrical accessories/parts
检测项目 Testing Items
  • Hazardous substance control
  • Materials Analysis
  • Compliance test
  • EMC test
  • Performance and benchmarking
  • Energy efficiency testing
  • Reliability test
检测标准 Testing Standard
  • Salt spray test:ISO 9227; ASTM B 117
  • Uv test:ISO 4892.3-2006; ASTM G 154-2006; ASTM D4674-2002
  • EU RoHS 2.0
  • California 65
  • SVHCHighly concerned substances
  • China RoHS
  • PAHS test
  • Phthalates control requirements
  • REACH
个人防护用品

Personal Protective Equipment


A&F is able to provide comprehensive testing services for protective gloves and intends to further enable certification services that can provide the CE mark.To provide customers with one-stop localization test certification service to the European and American markets,so that all their tests are completed in China,helping manufacturers of protective gloves to shorten testing time and save costs,greatly accelerating the pace of product entry into the global market.
检测对象 Testing Object
检测项目 Testing Items
  • Water resistance
  • Harmlessness of gloves
  • Glove size
  • Glove flexibility
  • Water vapor permeability
  • Water vapor absorption
  • Friction resistance
  • Cutting resistance
  • Tear resistance
  • Puncture resistance
检测标准 Testing Standard
  • EN 420 Protective gloves-General requirements and test methods
  • EN 388 Protective gloves against mechanical risks
  • General technical requirements for labor protective glove
  • Protective gloves against mechanical hazards
环境检测

Environmental Testing

  • >
    On-site and laboratory services
  • >
    Investigation And Monitoring Of Farmland Environment
  • >
    Ambient Air And Stationary Source Exhaust Monitoring
  • >
    Water Ouality Monitoring
  • >
    Indoor air monitoring
  • >
    Noise and vibration monitoring
  • >
    Acceptance of Environmental Protection On The Completion of Construction Projects


A&F environmental laboratory owns expertise,advanced equipments and a strong global network to contribute to the further development of products,services,and people and make them more competitive.

现场及实验室服务

On-site and laboratory services

埃欧孚秉承质量至上的原则,为各行各业的客户提供现场及实验室服务,在资深技术团队的支持下,专业的工程师将依据国内外标准方法,对不同类型的样品进行采样和测试分析。

埃欧孚每年持续参加国内外能力验证活动并取得满意结果。我们遵循严格的质量控制体系,从采样、测试分析到报告出具,每一个环节都有严格的质控措施,以确保数据结果公正、准确、可追溯。

全程质量校验

Whole-process Quality Control

客户申请

需要采样

无需采样

确定采样时间
采样计划等

A&F现场采样

客户直接送样

A&F向客户送采样设备

客户采样并
送至A&F

收样确认

实验室测试分析

数据审核
报告出具

实验室增值服务

Laboratory Value-added Services

  • 研发领域
  • 研发过程
  • 研发仪器
  • 服务内容
  • 非标污染物、非常规基质的测试方法

    新型环境污染物分析测试技术

  • 目标化合物化学性质考察

    实验室控制样品验证

    方法开发及验证

  • GC、GC-MS、PT-GC/MS、ICP-MS、ICP-AES、AAS、
    GFAA、AFS

  • 采样前技术支持及全程采样支持服务

    免费提供采集样品的容器、现场记录用品和冷藏箱

    现场采集样品说明

    样品的保护及运输

    协助客户现场进行快筛服务

    协助客户进行地下水监测井的洗井、采集样品和现场测
    定等其它服务......


场地及农田环境调查及检测

Investigation And Monitoring of Farmland Environment

埃欧孚将污染场地、农田土壤环境调查作为核心业务,通过现场踏勘及资料查阅,详细了解污染场地的历史使用情况、使用现状及未来规划方向等信息,并且综合考虑周边场地利用状况及污染物特性,制定合适的调查方案。

依据调查方案,开展现场采样及实验室分析工作。在取样过程及实验过程中行全流程质控,以保证所提供的报告具有空整性、可靠性;为污染场地、农田土壤环境调查提供有效的支持依据,从而完成污染场地、农田土壤环境调查检测报告并通过专家评审。

土壤与固体废弃物检测服务能力

Soil And Solid Waste Detection Service Capability

样品种类及检测对象 分析参数
土壤
淤泥
沉积物
固体废弃物
... ...
有机分析项目 挥发性有机物(VOCs)
半挥发性有机物(SVOCs)
总石油烃类(TPH)
多氯联苯(PCBs)
有机氯农药(OCPs)
有机磷农药(OPPs)
无机分析项目 金属元素
金属形态
常规理化
微生物分析项目 大肠菌群
蠕虫卵死活率
蠕虫卵死活率
蛔虫卵
菌落总数
其它

依据标准

According to The Standard

  • 《土壤环境质量建设用地土壤污染风险管控标准》(GB36600-2018)
  • 《土壤环境质量农用地土壤污染风险管控标准》(GB15618-2018)
  • 《生活垃圾填埋场污染控制标准》 (GB 16889-2008 )
  • 《危险废物填埋污染控制标准》(GB 18598-2019)
  • 提供场地的监测全流程服务

    Provide site monitoring services throughout the process

    ※污染场地调查与评估监测

    Survey evaluation and monitoring of contaminated sites

    ※污染场地环境风险评估监测

    Environmental risk assessment
    and monitoring of contaminated
    sites 62.1-)

    ※污染场地修复工程监测

    Monitoring of contaminated
    site restoration works

    ※污染场地修复效果评估监测

    Assessment and monitoring of the restoration effect of contaminated sites

    环境空气和固定污染源废气监测

    Ambient Air And Stationary Source Exhaust Monitoring

    环境空气和固定污染源废气监测

    Ambient Air And Stationary Source Exhaust Monitoring

    环境空气质量的好坏反映了空气污染程度,空气污染主要来自工业排放、汽车尾气、发电和焚烧排放等,污染物包括:烟尘、总悬浮颗粒物、可吸入颗粒物(浮尘)、二氧化氮、二氧化硫、一氧化碳、臭氧挥发性有机化合物等,服务范围涉及环境背景值调查、环境工程验收环境影响评价、环境质量监测等。

    固定污染源废气监测目的是检查污染源排放废气中的有害物质是否符合排放标准的要求;评价净化装置的性能和运行情况及污染防治措施的效果;为大气质量管理与评价提供依据。

    环境空气和固定污染源废气检测服务能力

    Amtbiemt air and fixed source exhaust gas testing capabilities

    样品种类及检测对象 分析参数
    环境空气
    工业废气
    ... ...
    有机分析项目 挥发性有机物(VOCs)
    非甲烷总烃(NMHC)
    苯系物(BTEX)
    其他
    无机分析项目 金属元素
    其他
    土壤气
    氨挥发性有机物
    其他
    其他 颗粒物
    恶臭
    蠕虫卵死活率
    烟气成分
    烟气参数
    其他
    依据标准

    According to The Standard

    • 《环境空气质量标准》(GB3095-2012)
    • 《固定污染源废气低浓度颗粒物的测定重量法》(HJ836-2017)
    • 《大气污染物综合排放标准》(GB16297-1996)
    • 《工业炉窑大气污染物排放标准》(GB9078-1996)
    • 《锅炉大气污染物排放标准》(GB13271-2014)
    • 《固定源废气监测技术规范》(HJ/T397-2007)
    • 《环境空气质量手工监测技术规范》(HJ194-2017)

    水质监测

    Water Quality Monitoring

    水质监测是水体质量检测、不仅包括水、还包括水中共存的悬浮物、底质和水生生物等。

    水质监测分类

    Water Quality Monitoring Classification

    • 水环境现状监测和水污染源监测
    • 对排放源排放的各类污水进行监视性监测
    • 为污染源管理和排放收费提供依据
    水质检测服务能力

    Water Quality Testing Service Capacity

    样品种类及检测对象 分析参数
    地下水
    地表水
    工业及生活废水
    生活饮用水、
    城镇污水
    ......
    有机分析项目 挥发性有机物(VOCs)
    半挥发性有机物(SVOCs)
    总石油烃类(TPH)
    多氯联苯(PCBs)
    有机氯农药(OCPs)
    有机磷农药(OPPs)
    其他
    无机分析项目 金属元素
    金属价态
    离子
    其他
    微生物分析项目 总大肠菌群
    粪大肠菌群
    耐热大肠菌群
    菌落总数
    其他
    依据标准

    According to The Standard

    • 《地下水质量标准》(GB/T14848-2017)
    • 《地表水环境质量标准》(GB3838-2002)
    • 《污水综合排放标准》(GB8978-1996)
    • 《生活饮用水卫生标准》(GB5749-2006)
    • 《污水监测技术规范》(HJ91.1-2019)
    • 《地下水环境监测技术规范》(HJ/T164-2004)
    • 《生活饮用水标准检验方法》(GB/T5750-2006)
    • 《水污染物排放总量监测技术规范》(HJ/T92-2002)
    • 《水质采样技术指导》(HJ494一2009)
    • 《水质采样样品的保存和管理技术规定》(HJ493一2009)
    • 《水环境监测规范》(SL219-2013)

    室内空气监测

    Indoor air monitoring

    人的一生有80-90%的时间是在室内度过,而室内空气中可以检测出300多中污染物和众多致癌物、致畸物,虽然室内污染物的浓度往往较低,但由于接触时间长,故其积累接触量很高。室内空气污染已被世界卫生组织视为危害人类健康的十大杀手之一。

    服务范围

    Service Scope

    • 室内环境检测与评价
    • 调查评估(污染源、异味调查、超标分析、集中供暖、通风与空调(HVAC) 系统净化评估)
    • 改善方案(甲醛、VOC治理、异味清除、颗粒物过滤、新风及空调系统改造等)
    • 效果追踪(通过跟踪检测或固定监测,检验治理效果)
    室内空气检测服务能力

    Indoor air testing service capability

    • 室内空气重点污染物检测:甲醛, 氨, 苯, TVOC, 氡等
    • 国内通用标准:GB50325-2010(2013版)、GB/T18883-2002
    • 微生物检测:菌落总数、细菌、真菌等
    • 物理测试:照度、噪声、空气流速、新风量等
    噪声与振动监测

    Noise and vibration monitoring

    随着工业生产、交通运输、城市建筑的发展,以及人口密度的增加,家庭设施的增多,环境噪声和环境振动日益严重,它已成为污染人类社会环境的一大公害,埃欧孚建立全面的噪声和环境振动测试能力,为您提供高质量的监测服务。

    依据标准

    According to The Standard

    • 《工厂企业厂界环境噪声排放标准》(GB12348-2008)
    • 《声环境质量标准》(GB3096-2008)
    • 《建筑施工场界环境噪声排放标准》(GB12523-2011)
    • 《社会生活环境噪声排放标准》(GB22337-2008)
    • 《城市声环境常规监测》(HJ640-2012)
    环境噪声与振动监测服务能力

    Environmental Noise And Vibration Monitoring Service Capability

    样品种类及检测对象 分析参数
    噪声 环境噪声监测
    社会生活噪声监测
    城市噪声监测
    工业企业厂界噪声监测
    建设项目竣工环境保护验收

    Acceptance of Environmental Protection On The Completion of Construction Projects

    • 资料核查

      Data Verification

      环评及批复/环保设计资料/竣工资料
    • 现场踏勘

      Site Survey

      环保工程概况/环保措施落实情况/重大变动的调查与确认/验收监测实施条件确认
    • 验收监测方案

      Acceptance Monitoring Program

      验收范围确定/验收内容确定/验收执行标准确定
    • 验收监测实施

      Acceptance monitoring implementation

      工况核查/采样与监测/其他环保设施核查
    • 验收与公示

      Acceptance and publicity

      验收监测报告编制/组织验收/整改措施跟踪/验收报告编制
    微生物

    Microbiological


    A&F's Microbial testing services span in a wide range of industries,from toy and children's products,textiles,cosmetics,disposable sanitary products,to various product types such as drinking water,food,pet food,and household water purifiers.Microbial testing mainly contains antimicrobial performance evaluation,microbial cleanliness test,and microbes identification.Antimicrobial performance test can evaluate products or formulation of products's potential for microbiological degradation;Microbial cleanliness test is to detect the microbial content in the product,especially the content of pathogenic bacteria,which is detrimental to human safety and product quality.The combination of microbial testing and identification of microbes help enterprises analyze the pollution sources of products and reduce the risk of microbial pollution from the very beginning.
    检测对象 Testing Object
    检测标准 Testing Standard

    Microbial antibacterial test:

    • Antiseptic challenge test for toys and children's products: USP 51、BP 16C、EP 5.1.3 etc.
    • Textile:AATCC100、AATCC147、AST M E2149、GB 20944Evaluation of antibacterial properties, Anti-fungal Antibacterial activity
    • Carpet: AATCC174 antibacterial activity, etc.
    • Polymer materials, hydrophobic materials: ASTM E2180 antibacterial performance, ASTM G21 antifungal test, etc.
    • Disposable hygiene products: GB 15979 sterilization performance, antibacterial performance, stability test, etc.
    • Cosmetics: ISO 11930 antiseptic challenge, etc.

    Microbiological cleanliness test:

    • Antiseptic challenge test for toys and children's products:USP 61&62(ASTM F963)、BP16B、EP 2.6.12&2.6.13、FDA BAM CHAPER6(ASTMF 963)、FDA CHAPTER 5 Salmonella, FDA CHAPTER 18 mold and yeast, etc.
    • Disposable hygiene products: GB 15979 total bacterial colonies, total fungal colonies, coliforms, Pseudomonas aeruginosa, Staphylococcus aureus, etc.
    • Cosmetics: ISO 11930 antiseptic challenges, etc.

    Water quality microbiological test:

    • GB 5750.12 Total colonies, total coliforms, heat-resistant coliforms, Escherichia coli, etc.

    Food Contact Materials/Food:

    • Dinnerware:GB 14934、GB 789.15、GB 4806.8
    • Food:GB 4789

    Inspection


    Delivering risk reduction and quality control to help you meet all relevant regulatory requirements.


    Our inspection services can provide reliable support for your products, projects and processes and minimize the risk of defective products by ensuring they comply with both customer standards and industry and government regulations. So that you reduce the risk of product recalls or other issues that could damage your profits as well as your long-term brand integrity.


    We offer inspection services to manufacturers, retailers, traders, plant operators, governments and other buyers and sellers of materials and products across different regions and markets. Our inspection services help you find defects at the very early stage, so that you can make changes where necessary and avoid the cost of disruptions throughout the entire supple chainfrom raw materials and finished goods to plant facilities and assets. Products and materials that we routinely test and inspect mainly include all kinds of consumer goods such as toys, cosmetics, hardgoods, clothes and so on.


    Inspection Service Types:


    Pre-Production Inspection
    The inspectors inspect the raw materials, pre-processed products and parts produced by random sampling.


    During Production Inspection
    Inspect the semi-finished products on the production line or the finished products just off the line, check for errors and deviations, report to the factory, and propose effective methods to correct the errors and deviations.


    Before Delivery Inspection
    Sampling inspection before delivery of the finished product: the inspector shall check the quantity, technology, function, color, size and packaging of the goods before the production and packaging of the product are completed and ready for shipment (usually 100% production is completed, 80% packaging accomplished)


    Others
    According to the requirements of customers and target markets, tailor-made inspection programs.